Test the glue before putting it in the Skins, it should turn a light grey colour.Remove the lid off the glue and attach the Mixing Tip.Fit the Adapter into the bottom of the Shufit Glue and put it in the glue applicator.Mark the centre of the hoof with a pencil so the Skins will be straight and centred when you glue them on.On the back of the hoof there should be no excessive overhang of the heel bulbs On the side of the hoof, the Skins should sit below the hairline. It should be snug at the front of the Skins with the toe forward.

Check the fit of the prepared Skins on the hoof.This allows the glue to penetrate the area and form a plug Place a piece of masking tape over the vents on the outside of the Skins.Once the methylated spirits has dried, the hoof is ready for gluing.Clean off any loose particles from the hoof with a rag and methylated spirits.Use a sanding block to sand off any remaining dirt or oil.Use the back of a rasp to rasp off any oil or dirt off the hoof wall.Use a heat gun or hair dryer to dry the hoof.Cut a piece of cloth tape and stick it across the slots on both sides and the opening at the front on the outside of the Skins.Clean the inside of the Skins with a rag and methylated spirits.Attach a wire brush to a cordless drill and rough up the inside of the Skins until all factory polish has been removed.Put on protective eye equipment and latex gloves.We recommend that gluing be undertaken by people who are skilled and experienced in gluing hoof boots. It is secured by the Mud Strap Collar and the Front Straps.īoth straps are made of an extremely robust material called thermoplastic urethane which stretches when placed under pressure, and when correctly secured, won’t affect the horse’s pastern. It is a long double-sided strap that is fitted between the rear vertical shank of the Scoot and over either side of the pastern. The Mud Strap provides unparalleled security in deep mud and when riding over rough terrain. The Scoot Mud Strap is the ultimate riding accessory for those who like it extreme. Each pair of Scoot Boots comes assembled with Pastern Straps and 2 extra Pastern Straps. However, it is not intended to be the primary source of securement. It is designed to help prevent the Scoot from being pulled off due to an overreach or being sucked off when riding through mud. The Pastern Strap is a long strap secured on each side of the Scoot and placed over the pastern. Go to our Online Store for more information.īoth the Pastern Strap and the Mud Strap are a source of securement for Scoot Boots.

Scoot Slims allow horses to travel over any type of terrain no matter how harsh, with comfort and support. Scoot Slims are a healthier, natural barefoot alternative to help protect sensitive horses’ hooves.

Fit hooves securely throughout a 5-6 week trimming cycle.

Great ventilation and breathability for hot climate riding.

Superb strength over all types of terrain.

Some of their superior features and benefits are: This provides extra security as well as good drainage and ventilation. Scoot Slims allow for a hoof to lock into the boot. Scoot Slims function exactly like our regular Scoot Boots except they are more suited to narrower hind hooves or slightly contracted hooves. They won’t get soggy or heavy when riding through mud and wet terrain. TPU has high abrasive and shock absorbing qualities making them extremely robust and lightweight. They are constructed of a strong material called thermoplastic urethane (TPU).

Boot scoot and skedaddle meaning